翻訳と辞書
Words near each other
・ 7.5 cm FK 38
・ 7.5 cm FK 7M85
・ 7.5 cm Gebirgsgeschütz 36
・ 7.5 cm Gebirgskanone Model 1911
・ 7.5 cm Infanteriegeschütz 37
・ 7.5 cm Infanteriegeschütz 42
・ 7.5 cm kanon PL vz. 37
・ 7.5 cm KwK 37
・ 7.5 cm KwK 40
・ 7.5 cm KwK 42
・ 7.5 cm L/45 M/16 anti aircraft gun
・ 7.5 cm L/45 M/32 anti aircraft gun
・ 7.5 cm leichtes Infanteriegeschütz 18
・ 7.5 cm Leichtgeschütz 40
・ 7.5 cm Pak 39
7.5 cm Pak 40
・ 7.5 cm Pak 41
・ 7.5 cm Pak 97/38
・ 7.5 cm tornpjäs m/57
・ 7.5 Fuyu Fuyu Morning Musume Mini!
・ 7.58 cm Minenwerfer
・ 7.5mm 1882 Ordnance
・ 7.5×54mm French
・ 7.5×55mm Swiss
・ 7.5×57mm MAS
・ 7.62 cm Infanteriegeschütz L/16.5
・ 7.62 cm Pak 36(r)
・ 7.62 mm caliber
・ 7.62 Tkiv 85
・ 7.62mm Thumper


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

7.5 cm Pak 40 : ウィキペディア英語版
7.5 cm Pak 40

The 7.5 cm Pak 40 (''7,5 cm Panzerabwehrkanone 40'') was a German 75 millimetre anti-tank gun developed in 1939-1941 by Rheinmetall and used during the Second World War. The Pak 40 formed the backbone of German anti-tank guns for the latter part of World War II, mostly in towed form, but also on a number of tank destroyers such as the ''Marder'' series. Approximately 23,500 Pak 40's were produced.
A modified version of the gun designed specifically for vehicle-mounting was the 7.5 cm KwK 40, which differed primarily in using more compact ammunition which allowed greater numbers of rounds to be carried inside the vehicles. The KwK 40 armed many of the German mid-war tank and destroyer designs, replacing the Pak 40 in the later role.
Depending on the source, the Pak 40 may be referred to as the 7.5/L46, referring to the barrel's length in calibres. There were two versions of the KwK 40, which would be referred to as the 7.5/L43 or 7.5/L48.
==Development==
Development of the Pak 40 began after reports of new Soviet tank designs began to reach Berlin in 1939. The 5 cm Pak 38 was still in testing at this point, but it appeared it would not be powerful enough to deal with these newer designs. Contracts were placed with Krupp and Rheinmetall to develop what was essentially a 7.5 cm version of the Pak 38. However, while the Pak 38 made extensive use of light alloys to reduce overall gun weight, these were now earmarked for ''Luftwaffe''. As a result, the Pak 40 used steel throughout its construction and was proportionally heavier than the 5 cm model. To simplify production, the Pak 38's curved gun shield was replaced by one using three flat plates.
The project was initially given low priority, but following the invasion of the USSR in 1941 and the appearance of heavily armoured Soviet tanks such as the T-34 and KV-1, it was given an increased priority. The first pre-production guns were delivered in November 1941. In April 1942, the ''Wehrmacht'' had 44 guns in service; by 1943 the Pak 40 formed the bulk of German anti-tank artillery.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「7.5 cm Pak 40」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.